Solutions of micrcochip Electronoic components for Home Appliances

Appliance manufacturers face numerous challenges in today's ever-changing global market. Government regulations, customer expectations, competitive forces and application innovations are fueling the integration of new technologies into many appliances. Bringing these technology advancements to market can be even more challenging with shorter deadlines, the pressure to maintain and grow market share and the constant need to innovate. In addition, finding partners with technical solutions to enable these goals can be daunting and drain your resources.

Our technologies can help you implement the new features and functionality required for your next appliance design. We provide solutions for user interface, motor control, sensing, connectivity and more so your design teams can focus on implementing your application.

Connectivity

The push toward smart energy is driving the need for adding connectivity to appliances so they can connect to each other, utility companies and consumers. If you are considering adding wired or wireless connectivity to your designs, we provide a wide range of wired and wireless products and support a variety of software protocols to provide cost-effective solutions that are very easy to implement in your product.

These are easy solutions for adding Wi-Fi or Wi-Fi/Bluetooth® 5.0 connectivity to the host microprocessor (MPU) or microcontroller (MCU) in your design.

Key Benefits:

Support for the Linux Operating System (OS) and RTOS
Add-on product for running link control
More customization options
Networking stack + application runs on external MCU/MPU

Part number : ATWILC1000

IEEE® 802.11 b/g/n Link Controller Module

IEEE 802.11 b/g/n (1 × 1)
Integrated Power Amplifier (PA) and Transmit/Receive (T/R) switch
Superior sensitivity and range via advanced PHY signal processing
Wi-Fi Direct®, station mode and Soft-AP support
Support for personal and enterprise IEEE 802.11 WEP, WPA and WPA2 security
On-chip memory management engine to reduce host load
SPI and SDIO host interfaces optimized for the Linux OS
Operating temperature range of −40°C to +85°C

Accessories's Parametrics:

ATWILC3000:

ATWILC3000 is a single chip IEEE 802.11 b/g/n RF/Baseband/MAC link controller and Bluetooth 5. The ATWILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with simple SPI/SDIO-to-Wi-Fi and UART-to-Bluetooth interfaces.

The ATWILC3000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP. The ATWILC3000 features fully integrated Power Amplifier, LNA, Switch and Power Management. Implemented in low-power CMOS technology, the ATWILC3000 offers very low power consumption while simultaneously providing high performance and minimal bill of materials.

The ATWILC3000 utilizes highly optimized 802.11-Bluetooth coexistence protocols. The only external clock sources needed for the ATWILC3000 is a high-speed crystal or oscillator and a 32.768 kHz clock for sleep operation.

The ATWILC3000 can be used in Linux, RTOS or Baremetal Environments.

The ATWILC3000 uses the same driver as the ATWILC1000.

Features :
IEEE 802.11 b/g/n Link Controller Module with Integrated Bluetooth 5.0
IEEE 802.11 b/g/n 20 MHz (1 × 1) Wi-Fi plus Bluetooth 5 Low Energy
Single spatial stream in 2.4 GHz ISM band
Integrated PA and T/R switch
Superior sensitivity and range via advanced PHY signal processing
Wi-Fi Direct and Soft-AP support
Support for personal and enterprise IEEE 802.11 WEP, WPA and WPA2 security
On-chip memory management engine to reduce host load
SPI and SDIO for Wi-Fi and UART BLE host interfaces optimized for the Linux OS
Host Control Interface (HCI) via high-speed UART
Operating temperature range of −40°C to +85°C
Bluetooth 5.0 certified
Adaptive frequency hopping

Matching Accessories Products: