PIC16F883-I/ML PIC 28 Pin Microcontroller IC QFN Automotive Power Management IC
PIC 28 Pin Microcontroller IC
,PIC16F883-I/ML PIC
,QFN Automotive Power Management IC
PIC16F883-I/ML Microchip PIC series Microcontroller IC FLASH Automotive 28-Pin QFN
Details :PIC16F883 MCU 8-bit PIC RISC 7KB Flash 2.5V/3.3V/5V Automotive 28-Pin QFN
Related :PIC12(L)F1840 PIC12(L)F1822 PIC16(L)F1823 PIC16(L)F1824 PIC16(L)F1826 PIC16(L)F1827
PIC16(L)F1828 PIC16(L)F1829 PIC16(L)F1847
PIC series Microcontroller IC 8-Bit IC Specification:
Category
|
Integrated Circuits (ICs)
|
Embedded - Microcontroller IC
|
|
Mfr
|
Microchip Technology
|
Series
|
PIC® XLP™ mTouch™ 16F
|
Package
|
Tape & Reel (TR)
|
Part Status
|
Active
|
Core Processor
|
PIC
|
Core Size
|
8-Bit
|
Speed
|
32MHz
|
Connectivity
|
I²C, LINbus, SPI, UART/USART
|
Peripherals
|
Brown-out Detect/Reset, POR, PWM, WDT
|
Number of I/O
|
11
|
Program Memory Size
|
7KB
|
Program Memory Type
|
FLASH
|
EEPROM Size
|
256 x 8
|
RAM Size
|
1K x 8
|
Voltage - Supply (Vcc/Vdd)
|
1.8V ~ 5.5V
|
Data Converters
|
A/D 8x10b
|
Oscillator Type
|
Internal
|
Operating Temperature
|
-40°C ~ 85°C (TA)
|
Mounting Type
|
Surface Mount
|
Package / Case
|
QFN28
|
Supplier Device Package
|
QFN |
Base Product Number
|
PIC16F883
|
Related products | PIC12(L)F1840 PIC12(L)F1822 PIC16(L)F1823 PIC16(L)F1824 PIC16(L)F1826 PIC16(L)F1827 PIC16(L)F1828 PIC16(L)F1829 PIC16(L)F1847 |
Environmental & Export Classifications
ATTRIBUTE | DESCRIPTION |
---|---|
RoHS Status | ROHS3 Compliant |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
REACH Status | REACH Unaffected |
ECCN | 3A991B1A |
HTSUS | 8542.32.0071 |
Description(Datasheet):
High-Performance RISC CPU • Only 49 Instructions to Learn: - All single-cycle instructions except branches
• Operating Speed: - DC – 32 MHz oscillator/clock input - DC – 125 ns instruction cycle
• Up to 16 Kbytes Linear Program Memory Addressing • Up to 1024 bytes Linear Data Memory Addressing
• Interrupt Capability with Automatic Context Saving
• 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset
• Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory Flexible Oscillator Structure • Precision 32 MHz Internal Oscillator Block: - Factory calibrated to ± 1%, typical - Software selectable frequencies range of 31 kHz to 32 MHz • 31 kHz Low-Power Internal Oscillator • Four Crystal modes up to 32 MHz
• Three External Clock modes up to 32 MHz • 4x Phase Lock Loop (PLL)
• Fail-Safe Clock Monitor: - Allows for safe shutdown if peripheral clock stops
• Two-Speed Oscillator Start-Up
• Reference Clock Module: - Programmable clock output frequency and duty cycle Special Microcontroller Features
• 1.8V-5.5V Operation – PIC16F1825/9
• 1.8V-3.6V Operation – PIC16LF1825/9
• Self-Programmable under Software Control
• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Programmable Brown-out Reset (BOR) • Extended Watchdog Timer (WDT)
• In-Circuit Serial Programming™ (ICSP™) via Two Pins • In-Circuit Debug (ICD) via Two Pins
• Enhanced Low-Voltage Programming (LVP) • Programmable Code Protection
• Power-Saving Sleep mode
Extreme Low-Power Management PIC16LF1825/9 with XLP • Sleep mode: 20 nA @ 1.8V, typical
• Watchdog Timer: 300 nA @ 1.8V, typical • Timer1 Oscillator: 650 nA @ 32 kHz, 1.8V, typical
• Operating Current: 48 µA/MHz @ 1.8V, typical Analog Features
• Analog-to-Digital Converter (ADC) Module: - 10-bit resolution,
up to 12 channels - Auto acquisition capability - Conversion available during Sleep
• Analog Comparator Module: - Two rail-to-rail analog comparators - Power mode control - Software controllable hysteresis
• Voltage Reference Module: - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels - 5-bit rail-to-rail resistive DAC with positive and negative reference selection Peripheral Highlights
• Up to 17 I/O Pins and 1 Input Only Pin: - High current sink/source 25 mA/25 mA - Programmable weak pull-ups - Programmable interrupt-on-change pins
• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler • Enhanced Timer1: - 16-bit timer/counter with prescaler - External Gate Input mode - Dedicated, low-power 32 kHz oscillator driver
• Three Timer2-types: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
• Two Capture, Compare, PWM (CCP) Modules
• Two Enhanced CCP (ECCP) Modules: - Software selectable time bases - Auto-shutdown and auto-restart - PWM steering
• Up to Two Master Synchronous Serial Port (MSSP) with SPI and I2CTM with: - 7-bit address masking - SMBus/PMBusTM compatibility
• Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) Module
• mTouch™ Sensing Oscillator Module: - Up to 12 input channels
14/20-Pin Flash Microcontrollers with XLP Technology microcontroller IC Marking information: