MK64FN1M0VLL12 MCU Kinetis K60 M4 Microcontroller ICs Chip Lead Free
MK64FN1M0VLL12 MCU
,M4 Microcontroller ICs Chip
,Kinetis K60 Microcontroller IC
MK64FN1M0VLL12 Kinetis K60 M4 series Microcontroller IC MCU Electronic componnets
MK64FN1M0VLL12 Kinetis K60 M4 series Microcontroller IC MCU Electronic componnets
ARM® Cortex®-M4 series Microcontroller IC 32-Bit 120MHz 1MB (1M x 8) FLASH 100-LQFP (14x14)
Kinetis K64F Sub-Family Data Sheet 120 MHz ARM® Cortex®-M4-based Microcontroller with FPU
The K64 product family members are optimized for cost-sensitive applications requiring low-power, USB/Ethernet connectivity, and up to 256 KB of embedded SRAM. These devices share the comprehensive enablement and scalability of the Kinetis family.
This product offers: • Run power consumption down to 250 μA/MHz. Static power consumption down to 5.8 μA with full state retention and 5 μs wakeup. Lowest Static mode down to 339 nA • USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO Vreg, with USB device crystal-less operation • 10/100 Mbit/s Ethernet MAC with MII and RMII interfaces.
Performance :
• Up to 120 MHz ARM® Cortex®-M4 core with DSP instructions and floating point unit Memories and memory interfaces
• Up to 1 MB program flash memory and 256 KB RAM
• Upto 128 KB FlexNVM and 4 KB FlexRAM on devices with FlexMemory
• FlexBus external bus interface System peripherals
• Multiple low-power modes, low-leakage wake-up unit
• Memory protection unit with multi-master protection • 16-channel DMA controller
• External watchdog monitor and software watchdog Security and integrity modules
• Hardware CRC module • Hardware random-number generator
• Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms
• 128-bit unique identification (ID) number per chip Analog modules
• Two 16-bit SAR ADCs
• Two 12-bit DACs
• Three analog comparators (CMP)
• Voltage reference
Communication interfaces
• Ethernet controller with MII and RMII interface
• USB full-/low-speed On-the-Go controller
• Controller Area Network (CAN) module
• Three SPI modules
• Three I2C modules. Support for up to 1 Mbit/s
• Six UART modules
• Secure Digital Host Controller (SDHC)
• I2S module
Timers
• Two 8-channel Flex-Timers (PWM/Motor control)
• Two 2-channel FlexTimers (PWM/Quad decoder)
• IEEE 1588 timers
• 32-bit PITs and 16-bit low-power timers
• Real-time clock
• Programmable delay block
Clocks
• 3 to 32 MHz and 32 kHz crystal oscillator
• PLL, FLL, and multiple internal oscillators
• 48 MHz Internal Reference Clock (IRC48M)
Operating Characteristics
• Voltage range: 1.71 to 3.6 V
• Flash write voltage range: 1.71 to 3.6 V
• Temperature range (ambient): –40 to 105°C
Specifications:
| Part number | MK64FN1M0VLL12 |
|
Category
|
Integrated Circuits (ICs)
|
|
Embedded - Microcontrollers
|
|
|
Mfr
|
Philip USA Inc.
|
|
Series
|
Kinetis K60
|
|
Package
|
Tray
|
|
Part Status
|
Active
|
|
Core Processor
|
ARM® Cortex®-M4
|
|
Core Size
|
32-Bit
|
|
Speed
|
120MHz
|
|
Connectivity
|
CANbus, EBI/EMI, Ethernet, I²C, IrDA, SD, SPI, UART/USART, USB, USB OTG
|
|
Peripherals
|
DMA, I²S, LVD, POR, PWM, WDT
|
|
Number of I/O
|
66
|
|
Program Memory Size
|
1MB (1M x 8)
|
|
Program Memory Type
|
FLASH
|
|
EEPROM Size
|
-
|
|
RAM Size
|
256K x 8
|
|
Voltage - Supply (Vcc/Vdd)
|
1.71V ~ 3.6V
|
|
Data Converters
|
A/D 32x16b; D/A 1x12b
|
|
Oscillator Type
|
Internal
|
|
Operating Temperature
|
-40°C ~ 105°C (TA)
|
|
Mounting Type
|
Surface Mount
|
|
Package / Case
|
100-LQFP
|
|
Supplier Device Package
|
100-LQFP (14x14)
|
|
Base Product Number
|
MK64FN1M0
|
Related products:
| MK64FX512VLL12 512 KB 256 66 |
| MK64FN1M0VLL12 1 MB 256 66 |
| MK64FX512VDC12 512 KB 256 83 |
| MK64FN1M0VDC12 1 MB 256 83 |
| MK64FX512VLQ12 512 KB 256 100 |
| MK64FN1M0VLQ12 1 MB 256 100 |
| MK64FX512VMD12 512 KB 256 100 |
| MK64FN1M0VMD12 1 MB 256 100 |
Environmental & Export Classifications
| ATTRIBUTE | DESCRIPTION |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| HTSUS | 8542.31.0001 |