TOP271KG AC DC Converter Chip TOPSwitch-JX Offline Switcher IC
TOP271KG AC DC Converter Chip
,TOPSwitch-JX Offline Switcher IC
,AC DC Converter Chip TOPSwitch-JX
TOP271KG Power Integrations TOPSwitch-JX PMIC AC DC Converters Offline Switchers IC chip
| Converter Offline Flyback Topology 66kHz, 132kHz 12-ESOP PMIC |
Description
TOPSwitch-JX cost effectively incorporates a 725 V power MOSFET, high-voltage switched current source, multi-mode PWM control,
oscillator, thermal shutdown circuit, fault protection and other control circuitry onto a monolithic device.
Typical Applications
• Notebook or laptop adapter
• Generic adapter
• Printer
• LCD monitor
• Set-top box
• PC or LCD TV standby
• Audio amplifier
Specification :
| Part number | TOP271KG |
|
Category
|
Integrated Circuits (ICs)
|
|
PMIC - AC DC Converters, Offline Switchers
|
|
|
Mfr
|
Power Integrations
|
|
Series
|
TOPSwitch-JX
|
|
Package
|
Tube/REEL
|
|
Output Isolation
|
Isolated
|
|
Internal Switch(s)
|
Yes
|
|
Voltage - Breakdown
|
725V
|
|
Topology
|
Flyback
|
|
Voltage - Supply (Vcc/Vdd)
|
-
|
|
Duty Cycle
|
78%
|
|
Frequency - Switching
|
66kHz, 132kHz
|
|
Power (Watts)
|
102 W
|
|
Fault Protection
|
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit
|
|
Control Features
|
Frequency Control
|
|
Operating Temperature
|
-40°C ~ 150°C (TJ)
|
|
Package / Case
|
12-BESOP (0.350", 8.89mm Width), 11 Leads, Exposed Pad
|
|
Supplier Device Package
|
12-ESOP
|
|
Mounting Type
|
Surface Mount
|
Product Highlights
EcoSmart – Energy Efficient
• Ideal for applications from 10 W to 245 W
• Energy efficient over entire load range
• No-load consumption below 100 mW at 265 VAC
• Up to 750 mW standby output power for 1 W input at 230 VAC
High Design Flexibility for Low System Cost
• Multi-mode PWM control maximizes efficiency at all loads
• 132 kHz operation reduces transformer and power supply size
• 66 kHz option for highest efficiency requirements
• Accurate programmable current limit
• Optimized line feed-forward for line ripple rejection
• Frequency jittering reduces EMI filter cost
• Fully integrated soft-start for minimum start-up stress
• 725 V rated MOSFET
• Simplifies meeting design derating requirements
Extensive Protection Features
• Auto-restart limits power delivery to <3% during overload faults
• Output short-circuit protection (SCP)
• Output over-current protection (OCP)
• Output overload protection (OPP)
• Output overvoltage protection (OVP)
• User programmable for hysteretic/latching shutdown
• Simple fast AC reset
• Primary or secondary sensed
• Line undervoltage (UV) detection prevents turn-off glitches
• Line overvoltage (OV) shutdown extends line surge withstand
• Accurate thermal shutdown with large hysteresis (OTP)
Advanced Package Options
• eDIP™-12 package:
• 43 W / 117 W universal input power output capability with
PCB / metal heat sink
• Low profile horizontal orientation for ultra-slim designs
• Heat transfer to both PCB and heat sink
• Optional external heat sink provides thermal impedance
equivalent to a TO-220
• eSIP™-7C package:
• 177 W universal input output power capability
• Vertical orientation for minimum PCB footprint
• Simple heat sink mounting using clip provides thermal
impedance equivalent to a TO-220
• eSOP™-12 package:
• 66 W universal input output power capability
• Low profile surface mounted for ultra-slim designs
• Heat transfer to PCB via exposed pad and SOURCE pins
• Supports wave or reflow soldering
• Extended creepage to DRAIN pin
• Heat sink is connected to SOURCE for low EMI
| ATTRIBUTE | DESCRIPTION |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| HTSUS | 8542.39.0001 |