LTC2902-2IGN#PBF LTC2902-1CGN#PBF LTC2902-1IGN#PBF LTC2902-2CGN#PBF LTC2902-1IGN Integrated circuits IC

LTC2902-2IGN#PBF LTC2902-1CGN#PBF LTC2902-1IGN#PBF LTC2902-2CGN#PBF

LTC2902-2IGN#TRPBF LTC2902-1IGN#TRPBF LTC2902-1CGN#TRPBF

LTC2902-2CGN#TRPBF Integrated circuits IC

Applications:

High Speed Differential Line Receiver
Crystal Oscillator Circuits
Window Comparators
Threshold Detectors/Discriminators
Pulse Stretchers
Zero-Crossing Detectors
High Speed Sampling Circuits

Description:

The LT®1720/LT1721 are UltraFastTM dual/quad comparators optimized for single supply operation,

with a supply voltage range of 2.7V to 6V.

The input voltage range extends from 100mV below ground to 1.2V below the supply voltage.

Internal hysteresis makes the LT1720/LT1721 easy to use even with slow moving input signals.

The rail-to-rail outputs directly interface to TTL and CMOS.

Alternatively, the symmetric output drive can be harnessed for analog applications or for easy translation to other single supply logic levels.

The LT1720 is available in three 8-pin packages; three pins per comparator plus power and ground.

In addition to SO and MSOP packages, a 3mm × 3mm low profi le (0.8mm) dual fi ne pitch leadless package (DFN) is available for space limited applications.

The LT1721 is available in the 16-pin SSOP and S packages.

The pinouts of the LT1720/LT1721 minimize parasitic effects by placing the most sensitive inputs (inverting) away from the outputs,

shielded by the power rails. The LT1720/LT1721 are ideal for systems where small size and low power are paramount.

Features:

UltraFast: 4.5ns at 20mV Overdrive 7ns at 5mV

Overdrive n Low Power: 4mA per Comparator

Optimized for 3V and 5V Operation n Pinout Optimized for High Speed Ease of Use

Input Voltage Range Extends 100mV Below Negative Rail

TTL/CMOS Compatible Rail-to-Rail Outputs n Internal Hysteresis with Specifi ed Limits

Low Dynamic Current Drain; 15μA/(V-MHz), Dominated by Load In Most Circuits

Tiny 3mm × 3mm × 0.75mm DFN Package (LT1720)

Product Categories

Audio Products
Development Boards, Kits, Programmers
Integrated Circuits (ICs)
Maker/DIY, Educational
Power Supplies - Board Mount
RF/IF and RFID
Test and Measurement
Circuit Protection
Discrete Semiconductor Products
Isolators
Networking Solutions
Power Supplies - External/Internal (Off-Board)
Resistors
Crystals, Oscillators, Resonators
Filters
Kits
Optoelectronics
Prototyping, Fabrication Products
Sensors, Transducers

Analog Devices (ADI) is a world leader in the design, manufacture, and marketing of a broad portfolio of high performance analog, mixed-signal, and digital signal processing (DSP) integrated circuits (ICs) used in virtually all types of electronic equipment. Since our inception in 1965, we have focused on solving the engineering challenges associated with signal processing in electronic equipment. Used by over 100,000 customers worldwide, our signal processing products play a fundamental role in converting, conditioning, and processing real-world phenomena such as temperature, pressure, sound, light, speed, and motion into electrical signals to be used in a wide array of electronic devices.

We accepts your orders for Analog Devices full range of products and provides comprehensive technical support.

Application:

Medical Instruments

Flash-Based MP3 Players

Noise Canceling Headphones

Wireless Mice

Bluetooth Headsets

More Linear technology parts number:

Description:

The LT®1720/LT1721 are UltraFastTM dual/quad comparators optimized for single supply operation,

with a supply voltage range of 2.7V to 6V.

The input voltage range extends from 100mV below ground to 1.2V below the supply voltage.

Internal hysteresis makes the LT1720/LT1721 easy to use even with slow moving input signals.

The rail-to-rail outputs directly interface to TTL and CMOS.

Alternatively, the symmetric output drive can be harnessed for analog applications or for easy translation to other single supply logic levels.

The LT1720 is available in three 8-pin packages; three pins per comparator plus power and ground.

In addition to SO and MSOP packages, a 3mm × 3mm low profi le (0.8mm) dual fi ne pitch leadless package (DFN) is available for space limited applications.

The LT1721 is available in the 16-pin SSOP and S packages.

The pinouts of the LT1720/LT1721 minimize parasitic effects by placing the most sensitive inputs (inverting) away from the outputs,

shielded by the power rails. The LT1720/LT1721 are ideal for systems where small size and low power are paramount.

Features:

UltraFast: 4.5ns at 20mV Overdrive 7ns at 5mV

Overdrive n Low Power: 4mA per Comparator

Optimized for 3V and 5V Operation n Pinout Optimized for High Speed Ease of Use

Input Voltage Range Extends 100mV Below Negative Rail

TTL/CMOS Compatible Rail-to-Rail Outputs n Internal Hysteresis with Specifi ed Limits

Low Dynamic Current Drain; 15μA/(V-MHz), Dominated by Load In Most Circuits

Tiny 3mm × 3mm × 0.75mm DFN Package (LT1720)