Send Message
Home > products > Arduino Development Board > ATWILC1000 SPI/SDIO To WiFi Transceiver Module ATWILC1000-MR110PB

ATWILC1000 SPI/SDIO To WiFi Transceiver Module ATWILC1000-MR110PB

Category:
Arduino Development Board
Price:
Negotiated
Payment Method:
T/T, Western Union,Paypal
Specifications
Details:
WiFi 802.11b/g/n Transceiver Module 2.412GHz ~ 2.472GHz Integrated, Trace Surface Mount
Family:
IEEE® 802.11 B/g/n Link Controller Module
Category:
RF/IF And RFID-RF Transceiver Modules And Modems
Antenna Type:
Integrated, Trace
Frequency:
2.412GHz ~ 2.472GHz
Mounting Type:
Surface Mounting
Data Rate:
54Mbps
Power:
Output 18.7dBm
Sensitivity:
-94dBm
Package / Case:
Module
Size:
21.72x14.73xmm
Soldering Composition:
ENIG
High Light:

ATWILC1000 WiFi Transceiver Module

,

SPI SDIO To WiFi Transceiver Module

,

ATWILC1000-MR110PB

Introduction

ATWILC1000 Microchip SPI/SDIO to Wi-Fi Transceiver Module ATWILC1000-MR110PB ATWILC1000-MR110UB

 

ATWILC1000 Microchip SPI/SDIO to Wi-Fi Transceiver Module ATWILC1000-MR110PB ATWILC1000-MR110UB

 

Overviews:

 

SmartConnect ATWILC1000 is an IEEE 802.11 b/g/n IoT link controller module.

 

The ATWILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface.

The ATWILC1000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP.

The ATWILC1000 features a fully integrated Power Amplifier, LNA, Switch and Power Management. The only external clock source needed is a high-speed crystal or oscillator.

The ATWILC1000 can be used in Linux, RTOS or Baremetal Environments.

 

Features:

ATWILC1000 -IEEE® 802.11 b/g/n Link Controller Module :

IEEE 802.11 b/g/n (1 × 1)
Integrated Power Amplifier (PA) and Transmit/Receive (T/R) switch
Superior sensitivity and range via advanced PHY signal processing
Wi-Fi Direct®, station mode and Soft-AP support
Support for personal and enterprise IEEE 802.11 WEP, WPA and WPA2 security
On-chip memory management engine to reduce host load
SPI and SDIO host interfaces optimized for the Linux OS
Operating temperature range of −40°C to +85°C

 

Description:

Category
RF/IF and RFID
 
RF Transceiver Modules and Modems
Mfr
Microchip Technology
Series
-
Package
Tape & Reel (TR)
Part Status
Active
RF Family/Standard
WiFi
Protocol
802.11b/g/n
Modulation
CCK, DSSS, OFDM
Frequency
2.412GHz ~ 2.472GHz
Data Rate
54Mbps
Power - Output
18.7dBm
Sensitivity
-94dBm
Serial Interfaces
I²C, SDIO, SPI, UART
Antenna Type
Integrated, Trace
Utilized IC / Part
-
Memory Size
-
Voltage - Supply
1.8V ~ 3.6V
Current - Receiving
63mA
Current - Transmitting
-
Mounting Type
Surface Mount
Operating Temperature
-40°C ~ 85°C
Package / Case
Module
Base Product Number
ATWILC1000

 

More part number: 
ATWILC1000B-UU-T
ATWILC1000-MR110UB-T
ATWILC1000-MR110UB
ATWILC1000-MR110PB-T
ATWILC1000-MR110PB
ATWILC3000-MR110CA
 
Alternate Products:
atwilc3000,atwinc1500,atwinc3400,atwilc1000-ic
 

Images:

 

ATWILC1000 SPI/SDIO To WiFi Transceiver Module ATWILC1000-MR110PBATWILC1000 SPI/SDIO To WiFi Transceiver Module ATWILC1000-MR110PBATWILC1000 SPI/SDIO To WiFi Transceiver Module ATWILC1000-MR110PB

ATWILC1000 SPI/SDIO To WiFi Transceiver Module ATWILC1000-MR110PB

 

Matching Accessories's Parametrics:
Antenna PCB, U.FL
Cloud Partner False
External PA Control No
Family Wi-Fi Link Controller
Frequency Range 2.412-2.472 MHz
Interface SPI, SDIO
Operating Temperature Min. -40C
Operating Temperature Max. +85C
Operating Voltage Min. 2.5V
Operating Voltage Max. 4.2V
Package Surface Mount Module
Pin Count 29
Power Output 18.6 dBm (802.11g 6Mbps)
Rx Current Consumption 85mA (802.11n MCS7)
Tx Current Consumption 186mA (802.11n MCS7)
RF Module True
RF Transceiver True
Input Sensitivity -94 (802.11b 1Mbps)
Sleep Mode Current Consumption 1.25uA
Type Wi-Fi Module

 

 

The ATWILC1000 and ATWILC3000 are both available in a chip-level solution.Please feel free to contact us for more. sales@icship.com

Send RFQ
Stock:
MOQ:
10pieces