PIC12F1822-I/P PIC12F1822 PIC12F Series IC 3.5 kB Flash 128 B SRAM Through Hole 8-Bit Microcontroller ICs

Product Description

PIC12F1822-I/P PIC12F1822 PIC12F Series IC 3.5 kB Flash 128 B SRAM Through Hole 8-Bit Microcontroller ICs

Related :PIC12F1822T-I/MF PIC12LF1822-E/MF PIC12LF1822T-I/MF PIC12F1822-I/P PIC12F1822-E/P

PIC series Microcontroller IC 8-Bit IC Specification:

Environmental & Export Classifications

About Microchip Technology

Microchip Technology  is a leading provider of microcontroller and analog semiconductors, providing low-risk product development, lower total system cost and faster time to market for thousands of diverse customer applications worldwide. Headquartered in Chandler, Arizona, Microchip offers outstanding technical support along with dependable delivery and quality.

8-Pin, 8-Bit Flash Microcontroller Product Brief:

High-Performance RISC CPU:
• Only 35 single-word instructions to learn
• All single-cycle instructions except for program
branches which are two-cycle
• Eight-level deep hardware stack
• Direct, Indirect and Relative Addressing modes
for data and instructions
• Operating speed:
- DC – 20 MHz clock input
- DC – 200 ns instruction cycle
Special Microcontroller Features:
• Program Memory Read Capability
• Program Memory Write Capability
• Precision Internal Oscillator:
- Selectable 4 MHz or 8 MHz frequency
- Factory calibrated to ±1%
• Power-saving Sleep mode
• Power-on Reset (POR)
• Power-up Timer (PWRT) and Oscillator Start-up
Timer (OST)
• Brown-out Reset (BOR)
• Watchdog Timer (WDT) with dedicated on-chip
RC oscillator for reliable operation
• Multiplexed MCLR input pin with internal pull-up
• Programmable code protection
• Selectable oscillator options:
- INTOSC: Precision internal oscillator
- EXTRC: External low-cost RC oscillator
- XT: Standard crystal/resonator
- HS: High-speed crystal/resonator
- LP: Power-saving, low-frequency crystal
- EC: High-speed external clock input
• In-Circuit Serial Programming™ (ICSP™)
• Programmable Interrupt-on-Change pins
Low-Power Features
• Operating current:
- 130 μA @ 2V, 1 MHz, typical
- 240 μA @ 2V, 4 MHz, typical
• Standby current:
- 50 nA @ 2V, typical
• Watchdog Timer current:
- 1 μA @ 2V, typical

CMOS Technology:
• Low-power, high-speed Flash technology:
- 100,000 Flash endurance
- > 40-year retention
• Fully static design
• Wide operating voltage range: 2.0V – 5.5V
• Wide temperature range:
- Industrial: -40°C to +85°C
- Extended: -40°C to +125°C
Peripheral Features:
• I/O pins:
- 5 I/O pins with individual direction control
- 1 input-only pin
- Individually selectable weak pull-ups
- High current sink/source for direct LED drive
• Analog-to-Digital (A/D) Converter:
- 10-bit resolution
- 4 external channels
- 3 internal channels to convert internal voltage
references
• Analog Comparator:
- One comparator
- Comparator inputs and output accessible
externally
- On-chip 0.6V absolute voltage reference
- Programmable on-chip voltage reference
(CVREF) module (% of VDD)
• Timer0 module: 8-bit timer/counter with 8-bit
programmable prescaler
• Enhanced Timer1 module:
- 16-bit timer/counter with prescaler
- External gate input
- Option to use OSC1/OSC2 input in LP mode
as Timer1 oscillator when in INTOSC mode
- Option to use system clock source as Timer1
clock input
• Timer2 module: 8-bit timer/counter with 8-bit
prescaler and postscaler
• Enhanced Capture Compare/PWM module
(ECCP):
- User selectable simultaneous PWM and
complementary PWM output for bridge drive
applications
- 16-bit capture maximum resolution 12.5 ns
- Compare maximum resolution 200 ns
- 10-bit PWM maximum frequency 20 kHz