Allegro MicroSystems Rotary Position Sensor IC Angle Linear Position Measuring IC
Allegro MicroSystems Rotary Position Sensor IC
,Angle Linear Position Measuring IC
,Allegro Rotary Position Sensor IC
A33230LLHALT-XZ-S-AR-03 Allegro MicroSystems Position Sensors Angle Linear Position Measuring IC
Hall Effect Sensor Rotary Position External Magnet IC Related products:
| Mfr Part # | Description | Supplier Device Package |
| MLX90373KVS-ABA-100-SP | IC SENSOR POSITION PSI-5 OUTPUT | 4-DMP |
| MLX90373KVS-ABA-300-SP | IC SENSOR POSITION PSI-5 OUTPUT | 4-DMP |
| MLX90374GVS-ABC-300-SP | IC SENSOR HALL 4DMP | 4-DMP |
| MLX90374GVS-ABC-107-SP | IC SENSOR HALL 4DMP | 4-DMP |
| MLX90374GVS-ABC-100-SP | IC SENSOR HALL 4DMP | 4-DMP |
| MLX90374GVS-ABC-307-SP | IC SENSOR HALL 4DMP | 4-DMP |
| MLX90374GDC-ABC-300-SP | IC SENSOR HALL 8SOIC | 8-SOIC |
| AS5600-ASOT | IC SENSOR MAG ROTARY 12BIT 8SOIC | 8-SOIC |
| MLX90373KGO-ABA-300-SP | IC SENSOR POSITION PSI-5 OUTPUT | 16-TSSOP |
| A33230LLHALT-XY-S-AR-10 | 3D HALL-EFFECT SENSOR IC WITH SI | SOT-23W-5 |
| A33230LLHALT-XZ-S-AR-03 | 3D HALL-EFFECT SENSOR IC WITH SI | SOT-23W-5 |
| A33230LLHALT-XZ-S-AR-10 | 3D HALL-EFFECT SENSOR IC WITH SI | SOT-23W-5 |
| A33230LLHALT-XY-S-AR-03 | 3D HALL-EFFECT SENSOR IC WITH SI | SOT-23W-5 |
| MLX90374GDC-ABC-100-SP | IC SENSOR HALL 8SOIC | 8-SOIC |
| MLX90373KVS-ABA-308-SP | IC SENSOR POSITION PSI-5 OUTPUT | 4-DMP |
| MLX90373KVS-ABA-108-SP | IC SENSOR POSITION PSI-5 OUTPUT | 4-DMP |
| MLX90364LVS-ADD-201-RE | IC SENSOR INTERFACE PROGR 4DMP | 4-DMP |
| MLX90364LVS-ADD-201-RX | IC SENSOR INTERFACE PROGR 4DMP | 4-DMP |
Applications:
Absolute Rotary Position Sensor
Steering Wheel Position Sensor
Pedal Position Sensor
Motor-shaft Position Sensor
Throttle Position Sensor
Float-Level Sensor
Ride Height Position Sensor
Non-Contacting Potentiometer
Description:
The MLX90316 is a Tria⊗is® Rotary Position Sensor providing the absolute angular position of a small dipole magnet rotating above the device surface (end-of-shaft magnet). Thanks to an Integrated Magneto-Concentrator (IMC) on its surface, the monolithic device senses, in a contactless fashion, the horizontal component of the applied magnetic flux density. This unique sensing principle applied to a rotary position sensor results into an impressive robustness of the angular position over the mechanical (airgap, off-axis) tolerances. The rotation of this horizontal component is sensed over a wide range (up to 360 Deg. - complete revolution) and processed by the onchip DSP (Digital Signal Processing) to ultimately report the absolute angular position of the magnet either as a ratiometric analog output or as PWM (Pulse-Width Modulation) signal or as a 14- bit data accessible through a 3-pin SPI (serial interface) channel. The output transfer characteristic is fully programmable (e.g. offset, gain, clamping levels, linearity, thermal drift, filtering, range...) to match any specific requirement through end-of-line calibration. The Melexis programming unit PTC-04 communicates and calibrates the device exclusively through the connector terminals (VDDVSS-OUT).
1. Ordering Information
| Product Code | Temperature Code | Package Code | Option Code | Packing Form Code |
| MLX90316 | S | DC | BCG-000 | RE |
| MLX90316 | E | DC | BCG-000 | RE |
| MLX90316 | K | DC | BCG-000 | RE |
| MLX90316 | L | DC | BCG-000 | RE |
| MLX90316 | E | GO | BCG-000 | RE |
| MLX90316 | K | GO | BCG-000 | RE |
| MLX90316 | L | GO | BCG-000 | RE |
| MLX90316 | K | DC | BCG-200 | RE |
| MLX90316 | K | GO | BCG-200 | RE |
| MLX90316 | K | DC | BCG-300 | RE |
| MLX90316 | K | GO | BCG-300 | RE |
| MLX90316 | E | DC | BDG-100 | RE |
| MLX90316 | K | DC | BDG-100 | RE |
| MLX90316 | L | DC | BDG-100 | RE |
| MLX90316 | E | GO | BDG-100 | RE |
| MLX90316 | K | GO | BDG-100 | RE |
| MLX90316 | L | GO | BDG-100 | RE |
| MLX90316 | L | GO | BDG-102 | RE |
| MLX90316 | L | DC | BDG-102 | RE |
| MLX90316 | L | DC | BCS-000 | RE |
Legend:
Temperature Code: S: from -20 Deg.C to 85 Deg.C
E: from -40 Deg.C to 85 Deg.C
K: from -40 Deg.C to 125 Deg.C
L: from -40 Deg.C to 150 Deg.C
Package Code: “DC” for SOIC-8 package
“GO” for TSSOP-16 package (dual die)
Option Code: AAA-xxx: die version
xxx-000: standard
xxx-100: SPI
xxx-102: SPI75AGC, see section 13.4.2
xxx-200: PPA (Pre-programmed Analog)
xxx-300: PPD (Pre-programmed Digital)
Packing Form: “RE” for Reel
“TU” for Tube
Ordering Example: MLX90316KDC-BCG-000-TU
Glossary of Terms
Gauss (G), Tesla (T) Units for the magnetic flux density - 1 mT = 10 G
TC Temperature Coefficient (in ppm/Deg.C.)
NC Not Connected
PWM Pulse Width Modulation
%DC Duty Cycle of the output signal i.e. TON /(TON + TOFF)
ADC Analog-to-Digital Converter DAC Digital-to-Analog Converter
LSB Least Significant Bit MSB Most Significant Bit
DNL Differential Non-Linearity INL Integral Non-Linearity
RISC Reduced Instruction Set Computer
ASP Analog Signal Processing DSP Digital Signal Processing
ATAN Trigonometric function: arctangent (or inverse tangent) IMC Integrated Magneto-Concentrator (IMC®)
CoRDiC Coordinate Rotation Digital Computer (i.e. iterative rectangular-to-polar transform)
EMC Electro-Magnetic Compatibility
4. Pinout
| PIN |
SOIC-8 TSSOP-16 Analog / PWM Serial Protocol Analog / PWM Serial Protocol |
1 VDD VDD VDIG1 VDIG1
2 Test 0 Test 0 VSS1 (Ground1) VSS1 (Ground1)
3 Switch OUT /SS VDD1 VDD1
4 Not Used / OUT 2 (2) SCLK Test 01 Test 01
5 OUT MOSI / MISO Switch OUT2 /SS2
6 Test 1 Test 1 Not Used2 SCLK2
7 VDIG VDIG OUT2 MOSI2 / MISO2
8 VSS (Ground) VSS (Ground) Test 12 Test 12
9 VDIG2 VDIG2
10 VSS2 (Ground2) VSS2 (Ground2)
11 VDD2 VDD2
12 Test 02 Test 02
13 Switch OUT1 /SS1
14 Not Used1 SCLK1
15 OUT1 MOSI1 / MISO1
16 Test 11 Test 11
For optimal EMC behavior, it is recommended to connect the unused pins (Not Used and Test) to the Ground.
5. Absolute Maximum Ratings
Parameter Value
Supply Voltage, VDD (overvoltage) + 20 V
Reverse Voltage Protection - 10 V
Positive Output Voltage – Standard Version + 10 V
(Analog or PWM) + 14 V (200 s max – TA = + 25 Deg.C)
Positive Output Voltage – SPI Version VDD + 0.3V
| Positive Output Voltage (Switch Out) |
+ 10 V + 14 V (200 s max – TA = + 25 Deg.C) |
Output Current (IOUT) ± 30 mA
Reverse Output Voltage - 0.3 V
Reverse Output Current - 50 mA
Operating Ambient Temperature Range, TA - 40 Deg.C … + 150 Deg.C
Storage Temperature Range, TS - 40 Deg.C … + 150 Deg.C
Magnetic Flux Density ± 700 mT
Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute maximum-
rated conditions for extended periods may affect device reliability.
| (Broken Track Diagnostic) (7) | BVSSPU |
Broken VSS (8) & Pull-up load RL ≥ 1 kΩ |
99 100 %VDD | |||||||||||||
| BVDDPD |
Broken VDD (8) & Pull-down load RL ≥ 1 kΩ |
0 1 %VDD | ||||||||||||||
| BVDDPU |
Broken VDD & Pull-up load to 5 V |
No Broken Track diagnostic %VDD |
||||||||||||||
| Clamped Output Level (9) |
Clamp_lo Programmable 0 100 %VDD Clamp_hi Programmable 0 100 %VDD |
|||||||||||||||
| Switch Out (10) |
Sw_lo Pull-up Load 1.5 kΩ to 5 V 0.55 1.1 V Sw_hi Pull-up Load 1.5 kΩ to 5 V 3.65 4.35 V |
|||||||||||||||
7. Isolation Specification
DC Operating Parameters at VDD = 5V (unless otherwise specified) and for TA as specified by the
Temperature suffix (S, E, K or L). Only valid for the package code GO i.e. dual die version.
Parameter Symbol Test Conditions Min Typ Max Units
Isolation Resistance Between dice 4 MΩ
8. Timing Specification
DC Operating Parameters at VDD = 5V (unless otherwise specified) and for TA as specified by the
Temperature suffix (S, E, K or L).
Parameter Symbol Test Conditions Min Typ Max Units
| Main Clock Frequency Ck |
Slow mode (11) Fast mode (11) |
7 20 |
MHz MHz |
|||||||||||||
| Sampling Rate |
Slow mode (11) Fast mode (11) |
600 200 |
μs μs |
|||||||||||||
| Step Response Time Ts |
4 600 |
ms μs |
||||||||||||||
Watchdog Wd See section 14 5 ms
Start-up Cycle Tsu Slow and Fast mode (11) 15 ms
| Analog Output Slew Rate |
COUT = 42 nF COUT = 100 nF |
200 100 |
V/ms V/ms |
PWM Frequency FPWM PWM Output Enabled 100 1000 Hz
| Digital Output Rise Time |
Mode 5 – 10 nF, RL = 10 kΩ Mode 7 – 10 nF, RL = 10 kΩ |
120 2.2 |
μs μs |
|||||
| Digital Output Fall Time |
Mode 5 – 10 nF, RL = 10 kΩ Mode 7 – 10 nF, RL = 10 kΩ |
1.8 1.9 |
μs μs |
|||||
Package Information: