DsPIC30F3010-I/SO DsPIC30F3011 Motor Control 16-Bit Digital Signal Controller IC Integrated Circuit

dsPIC30F3010 dsPIC30F3011 Motor Control 16-bit Digital Signal Controller IC integrated circuit

Seamless migration options from this device to dsPIC33F and PIC24 devices in similar packages.

Parts number :

DSPIC30F3010-30I/SO DSPIC30F3010-20I/SO  DSPIC30F3010T-30I/SO DSPIC30F3010T-20I/SO

DSPIC30F3010-30E/SO DSPIC30F3010-20E/SO DSPIC30F3010T-30E/SO DSPIC30F3010T-20E/SO

DSPIC30F3010-30I/ML DSPIC30F3010-20I/ML   DSPIC30F3010T-30I/ML DSPIC30F3010T-20I/ML

DSPIC30F3010-30I/SP DSPIC30F3010-20I/SP

High-Performance Modified RISC CPU
• Modified Harvard Architecture
• C Compiler Optimized Instruction Set Architecture
with Flexible Addressing modes
• 83 Base Instructions
• 24-bit Wide Instructions, 16-bit Wide Data Path
• 24 Kbytes On-Chip Flash Program Space
(8K instruction words)
• 1 Kbyte of On-Chip Data RAM
• 1 Kbyte of Nonvolatile Data EEPROM
• 16 x 16-bit Working Register Array
• Up to 30 MIPs Operation:
- DC to 40 MHz external clock input
- 4 MHz-10 MHz oscillator input with
PLL active (4x, 8x, 16x)
• 29 Interrupt Sources
- 3 external interrupt sources
- 8 user-selectable priority levels for each
interrupt source
- 4 processor trap sources

DSP Engine Features:
• Dual Data Fetch
• Accumulator Write Back for DSP Operations
• Modulo and Bit-Reversed Addressing modes
• Two, 40-bit Wide Accumulators with Optional saturation Logic
• 17-bit x 17-bit Single-Cycle Hardware Fractional/Integer Multiplier
• All DSP Instructions Single Cycle
• ±16-bit Single-Cycle Shift

Peripheral Features:
• High-Current Sink/Source I/O Pins: 25 mA/25 mA
• Timer module with Programmable Prescaler:
- Five 16-bit timers/counters; optionally pair
16-bit timers into 32-bit timer modules
• 16-bit Capture Input Functions
• 16-bit Compare/PWM Output Functions
• 3-Wire SPI modules (supports 4 Frame modes)
• I2CTM module Supports Multi-Master/Slave mode
and 7-bit/10-bit Addressing
• 2 UART modules with FIFO Buffers
Motor Control PWM Module Features:
• 6 PWM Output Channels
- Complementary or Independent Output
modes
- Edge and Center-Aligned modes
• 3 Duty Cycle Generators
• Dedicated Time Base
• Programmable Output Polarity
• Dead-Time Control for Complementary mode
• Manual Output Control
• Trigger for A/D Conversions
Quadrature Encoder Interface Module

Features:
• Phase A, Phase B and Index Pulse Input
• 16-bit Up/Down Position Counter
• Count Direction Status
• Position Measurement (x2 and x4) mode
• Programmable Digital Noise Filters on Inputs
• Alternate 16-bit Timer/Counter mode
• Interrupt on Position Counter Rollover/Underflow
Analog Features:
• 10-bit Analog-to-Digital Converter (ADC) with
4 Sample and Hold (S&H) Inputs:
- 1 Msps conversion rate
- 9 input channels
- Conversion available during Sleep and Idle
• Programmable Brown-out Reset

Special Microcontroller Features:
• Enhanced Flash Program Memory:
- 10,000 erase/write cycle (min.) for
industrial temperature range, 100K (typical)
• Data EEPROM Memory:
- 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)
• Self-Reprogrammable under Software Control
• Power-on Reset (POR), Power-up Timer (PWRT)
and Oscillator Start-up Timer (OST)
• Flexible Watchdog Timer (WDT) with On-Chip
Low-Power RC Oscillator for Reliable Operation
• Fail-Safe Clock Monitor Operation Detects Clock
Failure and Switches to On-Chip Low-Power RC

Oscillator
• Programmable Code Protection
• In-Circuit Serial Programming™ (ICSP™)
• Selectable Power Management modes:
- Sleep, Idle and Alternate Clock modes

CMOS Technology:
• Low-Power, High-Speed Flash Technology
• Wide Operating Voltage Range (2.5V to 5.5V)
• Industrial and Extended Temperature Ranges
• Low Power Consumption

Specification:

Environmental & Export Classifications

More 16-bit PIC MCU and DSC Microchip Part number: