LAN8810I-AKZE Ethernet Transceiver LAN8810 Microchip Network Interfaces IC

LAN8810I-AKZE ETHERNET TRANSCEIVER LAN8810 Microchip Network Interfaces IC

LAN8810I-AKZE ETHERNET TRANSCEIVER LAN8810 Microchip IC

The Microchip LAN8810/LAN8810i is a low-power 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet physical layer (PHY) transceiver with variable I/O voltage that is fully compliant with the IEEE 802.3 and 802.3ab standards.

The LAN8810/LAN8810i can be configured to communicate with an Ethernet MAC via the standard MII (IEEE 802.3u)/GMII(IEEE 802.3z) interfaces. It contains a full-duplex transceiver for 1000Mbps operation on four pairs of category 5 or better balanced twisted pair cable. Per IEEE 802.3-2005 standards, all digital interface pins are tolerant to 3.6V.

The LAN8810/LAN8810i is configurable via hardware and software, supporting both IEEE 802.3-2005 compliant and vendor-specific register functions via SMI. The LAN8810/LAN8810i implements Auto-Negotiation to automatically determine the best possible speed and duplex mode of operation. HP Auto-MDIX support allows the use of direct connect or cross-over cables.

Features:

Single-Chip Ethernet Physical Layer Transceiver (PHY)
Compliant with IEEE 802.3ab (1000BASE-T), IEEE 802.3u (Fast Ethernet), and ISO 802-3/IEEE 802.3 (10BASE-T)
HP Auto-MDIX support in accordance with IEEE 802.3ab specification at 10/100/1000 Mbps operation
Small footprint 72-pin QFN RoHS compliant package with GMII (10 x 10 x 0.9mm height)
Flexible configurations for LED status indicators
Implements Reduced Power Operating Modes
Compliant with IEEE 802.3ab (1000BASE-T)
Compliant with IEEE 802.3/802.3u (Fast Ethernet)
Compliant with ISO 802-3/IEEE 802.3 (10BASE-T)
10BASE-T, 100BASE-TX and 1000BASE-T support
Loop-back modes
Auto-negotiation (NEXT page support)
Automatic polarity detection and correction
Link status change wake-up detection
Vendor specific register functions
Controlled impedance outputs
Four status LED outputs and configurable LED modes with support for tricolor operation
GMII pins tolerant to 3.6V
Integrated DSP implements adaptive equalizer, echo cancellers, and crosstalk cancellers
Efficient digital baseline wander correction
Configurable LED outputs
Various low power modes
Variable voltage I/O supply (2.5V/3.3V)
IEEE 1149.1 (JTAG) boundary scan
Multiple clock options - 25MHz crystal or 125MHz clock
72-pin QFN (10x10 mm) RoHS compliant package with GMII
Commercial temperature range (0°C to +70°C)
Industrial temperature range (-40°C to +85°C)
Set-Top Boxes
Networked Printers and Servers
Test Instrumentation
LAN on Motherboard
Embedded Telecom Applications
Video Record/Playback Systems
Cable Modems/Routers
DSL Modems/Routers
Digital Video Recorders
IP and Video Phones
Wireless Access Points
Digital Televisions
Digital Media Adaptors/Servers
Gaming Consoles
POE Applications

Environmental & Export Classifications

Most Popular Network Interfaces IC