STA1052NV2-CU STA1052N1 STMicroelectronics Microcontrollers DSP MCU INFOTAINMENT 144LQFP
FLASH Type Integrated Circuits
,Electronic Components Integrated Circuits
STA1052NV2-CU STA1052N1 STMicroelectronics Microcontrollers DSP MCU INFOTAINMENT 144LQFP
DSP/MCU INFOTAINMENT 144LQFP Specifications:
|
Category
|
|
|
Embedded - Microcontrollers - Application Specific
|
|
|
Mfr
|
STMicroelectronics
|
|
Series
|
Automotive, AEC-Q100
|
|
Package
|
Tray
|
|
Product Status
|
Active
|
|
Applications
|
Automotive
|
|
Core Processor
|
ARM7®
|
|
Program Memory Type
|
ROM (384kB)
|
|
Controller Series
|
-
|
|
RAM Size
|
128K x 8
|
|
Interface
|
I²C, I²S, SPI, UART, USB
|
|
Voltage - Supply
|
1.71V ~ 1.89V
|
|
Operating Temperature
|
-40°C ~ 85°C
|
|
Mounting Type
|
Surface Mount
|
|
Package / Case
|
144-LQFP
|
|
Supplier Device Package
|
144-LQFP (20x20)
|
|
Base Product Number
|
STA1052
|
Reference Part number:
STM32F103x8 STM32F103C8, STM32F103R8 STM32F103V8, STM32F103T8 STM32F103xB STM32F103RB
STM32F103VB,STM32F103CB, STM32F103TB
Features
• ARM® 32-bit Cortex®-M3 CPU Core
– 72 MHz maximum frequency,
1.25 DMIPS/MHz (Dhrystone 2.1)
performance at 0 wait state memory
access
– Single-cycle multiplication and hardware
division
• Memories
– 64 or 128 Kbytes of Flash memory
– 20 Kbytes of SRAM
• Clock, reset and supply management
– 2.0 to 3.6 V application supply and I/Os
– POR, PDR, and programmable voltage
detector (PVD)
– 4-to-16 MHz crystal oscillator
– Internal 8 MHz factory-trimmed RC
– Internal 40 kHz RC
– PLL for CPU clock
– 32 kHz oscillator for RTC with calibration
• Low-power
– Sleep, Stop and Standby modes
– VBAT supply for RTC and backup registers
• 2 x 12-bit, 1 µs A/D converters (up to 16
channels)
– Conversion range: 0 to 3.6 V
– Dual-sample and hold capability
– Temperature sensor
• DMA
– 7-channel DMA controller
– Peripherals supported: timers, ADC, SPIs,
I
2Cs and USARTs
• Up to 80 fast I/O ports
– 26/37/51/80 I/Os, all mappable on 16
external interrupt vectors and almost all
5 V-tolerant
Debug mode
– Serial wire debug (SWD) & JTAG
interfaces
• 7 timers
– Three 16-bit timers, each with up to 4
IC/OC/PWM or pulse counter and
quadrature (incremental) encoder input
– 16-bit, motor control PWM timer with deadtime generation and emergency stop
– 2 watchdog timers (Independent and
Window)
– SysTick timer 24-bit downcounter
• Up to 9 communication interfaces
– Up to 2 x I2C interfaces (SMBus/PMBus)
– Up to 3 USARTs (ISO 7816 interface, LIN,
IrDA capability, modem control)
– Up to 2 SPIs (18 Mbit/s)
– CAN interface (2.0B Active)
– USB 2.0 full-speed interface
• CRC calculation unit, 96-bit unique ID
• Packages are ECOPACK
Environmental & Export Classifications
|
|---|