XC2VP30-5FFG1152C XC2VP30-5FF1152I XC2VP30-5FF896I XC2VP30-5FGG676I XC2VP30-6FFG1152C XC2VP30-6FFG896I XC2VP30-6FFG896C XC2VP30-6FGG676C

XC2VP30 XILINX Virtex FPGA ICs

XC2VP30-5FFG1152C

XC2VP30-5FF1152I

XC2VP30-5FF896I

XC2VP30-5FGG676I

XC2VP30-6FFG1152C

XC2VP30-6FFG896I

XC2VP30-6FFG896C

XC2VP30-6FGG676C

Virtex series XILINX FPGA IC Description :

The Virtex FPGA family delivers high-performance, high-capacity programmable logic solutions. Dramatic increases in silicon efficiency result from optimizing the new architecture for place-and-route efficiency and exploiting an aggressive 5-layer-metal 0.22 μm CMOS process. These advances make Virtex FPGAs powerful and flexible alternatives to mask-programmed gate arrays. The Virtex family comprises the nine members shown in Table 1. Building on experience gained from previous generations of FPGAs, the Virtex family represents a revolutionary step forward in programmable logic design. Combining a wide variety of programmable system features, a rich hierarchy of fast, flexible interconnect resources, and advanced process technology, the Virtex family delivers a high-speed and high-capacity programmable logic solution that enhances design flexibility while reducing time-to-market.

The Spartan® and the Spartan-XL FPGA families are a high-volume production FPGA solution that delivers all the key requirements for ASIC replacement up to 40,000 gates. These requirements include high performance, on-chip RAM, core solutions and prices that, in high volume, approach and in many cases are equivalent to mask programmed ASIC devices. By streamlining the Spartan series feature set, leveraging advanced process technologies and focusing on total cost management, the Spartan series delivers the key features required by ASIC and other high-volume logic users while avoiding the initial cost, long development cycles and inherent risk of conventional ASICs. The Spartan and Spartan-XL families in the Spartan series have ten members, as shown in Table 1. Spartan/Spartan-XL FPGA Features Note: The Spartan series devices described in this data sheet include the 5V Spartan family and the 3.3V Spartan-XL family. See the separate data sheets for more advanced members for the Spartan Series. • First ASIC replacement FPGA for high-volume production with on-chip RAM • Density up to 1862 logic cells or 40,000 system gates • Streamlined feature set based on XC4000 architecture • System performance beyond 80 MHz • Broad set of AllianceCORE and LogiCORE™ predefined solutions available • Unlimited reprogrammability • Low cost.

System level features - Available in both 5V and 3.3V versions - On-chip SelectRAM™ memory - Fully PCI compliant - Full readback capability for program verification and internal node observability - Dedicated high-speed carry logic - Internal 3-state bus capability - Eight global low-skew clock or signal networks - IEEE 1149.1-compatible Boundary Scan logic - Low cost plastic packages available in all densities - Footprint compatibility in common packages • Fully supported by powerful Xilinx ISE® Classics development system - Fully automatic mapping, placement and routing Additional Spartan-XL Family Features • 3.3V supply for low power with 5V tolerant I/Os • Power down input • Higher performance • Faster carry logic • More flexible high-speed clock network • Latch capability in Configurable Logic Blocks • Input fast capture latch • Optional MUX or 2-input function generator on outputs • 12 mA or 24 mA output drive • 5V and 3.3V PCI compliant • Enhanced Boundary Scan • Express Mode configuration

The Spartan®-3A family of Field-Programmable Gate Arrays (FPGAs) solves the design challenges in most high-volume, cost-sensitive, I/O-intensive electronic applications. The five-member family offers densities ranging from 50,000 to 1.4 million system gates, as shown in Table 1. The Spartan-3A FPGAs are part of the Extended Spartan-3A family, which also include the non-volatile Spartan-3AN and the higher density Spartan-3A DSP FPGAs. The Spartan-3A family builds on the success of the earlier Spartan-3E and Spartan-3 FPGA families. New features improve system performance and reduce the cost of configuration. These Spartan-3A family enhancements, combined with proven 90 nm process technology, deliver more functionality and bandwidth per dollar than ever before, setting the new standard in the programmable logic industry. Because of their exceptionally low cost, Spartan-3A FPGAs are ideally suited to a wide range of consumer electronics applications, including broadband access, home networking, display/projection, and digital television equipment. The Spartan-3A family is a superior alternative to mask programmed ASICs. FPGAs avoid the high initial cost, lengthy development cycles, and the inherent inflexibility of conventional ASICs, and permit field design upgrades.

XILINX Virtex™ 2.5 V Field Programmable Gate Arrays FPGA Families Data Sheet(Some Product are Obsolete/Under Obsolescence,welcome to contact us by sales@icschip.com for more information)

For more information on stock availability of the Spartan-3A FPGA family,Please feel free to send email : sales@icschip.com